STRONN Polyurethane Heat Activated Adhesive Glue Automotive

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue  FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue 

FOR INDUSTRIAL OR PROFESSIONAL USE ONLY.

One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures.

And for automotive upholstery

Made in USA

How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours.

Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers).

DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY

CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue  FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures. And for automotive upholstery Made in USA How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours. Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers). DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Textiles - PUR hot melt adhesives

Heat Adhesive Tape

Tape & Adhesives

Bostik 1100 FAST SET – URETHANE SEALANT/ADHESIVE – Gray - Chemical Concepts

PUR adhesives, Structural adhesives

STRONN Polyurethane Heat Activated Adhesive Glue Automotive for Upholstery shoe leather – cmodd

Sikaflex 11 FC All Purpose Polyurethane Adhesive 300 ml-White - Chemical Concepts

3M 10 oz. White 5200 Marine Adhesive Polyurethane Sealant PN06500HC - The Home Depot

32oz Polyurethane Heat Activated Adhesive Glue Contact Cement for Automotive Upholstery & Shoe Sole 1qt STRONN SAR 306 : Automotive

Hot Melt Adhesive Film - Professional Manufacturer